BikeParts Wiki
File:RIOT Mime-340x250.jpg

Jake Lyall on the RIOTwheel at Burningman.

A RIOT wheel is a one-wheeled vehicle, or monowheel. Housing a motor and counterweight inside a giant wheel, the driver sits on a platform that extends out in front of the device.

By moving the wheel's center of gravity forward, the wheel turns. Inside is a lead-weighted engine, which hangs by bearings off a stationary center shaft and uses its torque to move from 0 degrees vertical when stationary to 90 degrees forward at full blast, continually pulling itself forward around a sprocket bolted to the outer spokes. An independent counterweight system keeps the driver floating gently above ground out front, instead of inside the wheel, where most monowheel designs sequester him. Steering is handled by a gyro system and the driver's shifting weight.[1]


37-year-old part-time programmer and Renaissance Fair jouster had never worked for a garage, studied engineering, or even held a welder before he built the RIOT Wheel. Jake Lyall spent $5,000 and 900 hours building a massive 1,100-pound motorized monowheel. The RIOT Wheel (which stands for Reinvention of the Wheel) reaches a top speed of about 28 mph. So far Lyall has no commercial designs on the project, which debuted at 2003's Burning Man Festival. He hopes that a refined electric version will break the monowheel land-speed record of 57 mph.[1]

Since the creation of the RIOT wheel, there have been 2 more designed RIOT 2 and RIOT 3. RIOT 2 utilizes a hybrid/electric engine and is mostly aluminum which makes it weigh significantly less. Its gyro is better designed, so it is more effective, while lighter and faster. The RIOT 3 is solely designed for beating the world single-wheel land-speed record. It's powered by a Kostov DC electric motor, which can (for short periods) produce 200 hp.[2] Many electric vehicles have weight problems due to the batteries they utilize, and are slower because of that. The RIOT 3 however, is able to use the weight to its advantage.[3]


File:Auto0504wheel A.gif


A. Chassis, MIG-welded out of thin-walled steel tubing.

B. Spring-mounted seat tilts 15 degrees each way.

C. Throttle controls engine speed; joystick controls gyro and counterweight crane to lift or lower the driver.

D. 80cc four-stroke Honda scooter engine and 80 pounds of lead, delivering 120 pound-feet of torque at 90 degrees forward.

E. Sprocket bolted to outer spoke transfers engine assembly's torque to wheel.

F. Disc brake bolted to outer spoke; in full-skid braking, engine assembly is pulled backward from 0 degrees, pushing the driver quickly but safely to the ground, where a skid plate on the bottom of the seat aids braking.

G. 450-pound counterweight system, which works even without the engine inside.

H. 65-pound steel gyro, powered by two fan motors, tilts on a horizontal axis to yaw the vehicle for steering.

I. 1.5-gallon gas tank. Future versions will be electric.

J. 20-inch-wide rimless tire.


  1. 1.0 1.1 Template:Cite web
  2. Template:Cite web
  3. Template:Cite web

See also[]

External links[]